CLASS 4-7 SLIPPERS CAPACITY 5 TONNE PLUS
CLASS 4-7 SLIPPERS CAPACITY 5 TONNE PLUS
The Class 4-7 Forklift slippers Capacity 5 Tonne plus are designed and manufactured to temporarily extend existing fork tynes and should not be used as a permanent attachment.
In accordance with AS2359.15 fork slippers used for general usage should be no longer than 167% of the supporting tyne’s length. If the slippers are longer than 167%, then the usage of those slippers shall be restricted to their specified application.
When using Fork Slipper Tyne Extensions, caution must be exercised to ensure that they are used only for load stabilizing purposes and that the load is uniform and fully supported by the appropriate fork tyne.
- Zinc plated finish.
- Supplied with heel lock pins.
Related products
CLASS 3 SLIPPERS, FORK CAPACITY 2.6 – 4.9 TONNE
The Class 3 Forklift slippers Capacity 2.6 to 4.9 Tonne are designed and manufactured to temporarily extend existing fork tynes and should not be used as a permanent attachment. In accordance with AS2359.15 fork slippers used for general usage should be no longer than 167% of the supporting tyne's length. If the slippers are longer than 167%, then the usage of those slippers shall be restricted to their specified application. When using Fork Slipper Tyne Extensions, caution must be exercised to ensure that they are used only for load stabilizing purposes and that the load is uniform and fully supported by the appropriate fork tyne. Zinc plated finish. Supplied with heel lock pins.
-
CLASS 1 SLIPPERS, FORK CAPACITY UP TO 0.9 TONNE
Class 1 Forklift slippers Capacity up to 0.9 Tonne are designed and manufactured to temporarily extend existing fork tynes and should not be used as a permanent attachment. In accordance with AS2359.15 fork slippers used for general usage should be no longer than 167% of the supporting tyne's length. If the slippers are longer than 167%, then the usage of those slippers shall be restricted to their specified application. When using Fork Slipper Tyne Extensions, caution must be exercised to ensure that they are used only for load stabilizing purposes and that the load is uniform and fully supported by the appropriate fork tyne. Note! Maximum Tyne Size = 100mm x 45mm Zinc plated finish. Supplied with heel lock pins.
